Monday, 04.29.2024, 7:25 PM

Welcome Guest

My site

Log In
Search
Site friends
  • uCoz Community
  • uCoz Manual
  • Video Tutorials
  • Official Template Store
  • Best uCoz Websites
  • Statistics

    Total online: 1
    Guests: 1
    Users: 0
    LIGHT


    Lighting equipment, light and sound
    alarm
    The lighting system is designed to provide DWI-
    tion of the car in the dark. It includes the headlights
    (the headlight), the rear lights, the rear lights but
    dimensional sign, lamps of illumination of salon and a Luggage Department
    tion, the lamp, engine compartment lighting and glove compartment.
    The lighting system is designed to pre-
    to avoid other road users about the change
    the direction of movement of the car (when cornering and manoeuvrability-
    risovanie), the braking of the car, as well as about accidents-
    nom it stop. It includes front signal background
    ri, which may be part of the block-headlights, rear-honk-
    nye lights, part of tail lights, side
    repeaters turn signals, warning lights in com-
    the combination of instruments, electronic relay and breaker off
    the group. Reflectors marker lamps turn have
    orange color, stoplight red.
    Right and left turn signals are activated growling-
    d, located under the steering wheel. In this case, all
    right and left warning and indicator lamps are lit
    flashing within 60...120 times per minute with light through
    special electronic relay-interrupter included
    in the electric circuit. After the release of the car of turn-
    the lever under the steering wheel automatically
    returns to its original position. If the warning light
    in the instrument cluster blinks with the doubled frequency,
    this means that is not lit one of the signal lamps or
    faulty relay-breaker.
    When a forced stop on the roadway because of
    car malfunction by pressing a special button
    an alarm. In this case, the Prairie-
    victim light will light all the warning lights
    direction indicators and warning lamp in the Combi-
    tion of the devices. The alarm is activated when peo-
    Bohm the key position of the ignition switch, as it
    the chain passes, bypassing the switch.
    Block-headlight of the car VAZ-2109 includes
    a rectangular headlight with a main lamp and an envelope-
    tion of light, interlocked with the turn signal indicator with
    diffuser is orange. The front headlights to the plastic-
    Solomou the body glued to the lens of a colorless stack
    La, on the inner side of which is made of a complex system
    the theme of prisms and lenses.
    At the rear of the headlamp housing is installed in the reflector,
    prepared of steel. To create a mirror reflect-
    ing the surface of it is covered with heat-resistant special
    varnish and thin layer of aluminum. In front of the reflector Lam
    sing sets the screen, providing a clearer
    the boundary of the beam. Lamp type АКГ12-60+55
    head light headlight halogen; bulb filled its pair-
    the mi of a halogen (iodine or bromine) and an inert gas (mixture of ar-
    gon and nitrogen or krypton, and xenon). This lamp has a
    high luminous efficiency and a higher tempera-
    Roy heating the filaments, and increased pressure inside the flask
    increases term of its service. Grease lamps
    lead to darkening of the glass, reduced light output,
    it quickly overheats and fails. Therefore, when
    replacing the lamp you can't take her fingers, and should be applied-
    to do this, take a clean piece of cloth or gloves.
    In the lamp are two filaments. One thread (60 wt) for dal-
    light is in the focus of the reflector and produces tight PU
    chalk light parallel to the road for a long distance. Other
    Gaia thread (55 W) low beam derived from forward
    focus and closed bottom metal shield, prevent-
    posing spread beam up. Right
    position lamp in the headlamp is determined by the design of the cartridge-
    on in which it is installed.
    The start direction of the headlight can be adjusted
    horizontal and vertical screws control
    toos. To adjust the beam of light of headlights depending on
    the load is set manually hydrocollator, go-
    strap from the driver's seat by turning the handle.
    Hydrocollator consists of working cylinder, set
    Lenno on the instrument panel, the Executive of the cylinder,
    mounted on the headlamps and connecting pipes. Cylinder-
    ry and the tube filled with a special low-freezing
    liquid. Hydrocollator non-separable and in case the unit is blocked-
    equality is replaced by the new.
    . The fixture is fixed to the body on
    the studs with nuts. It has a section with lamps
    side marker light, reversing light, brake signals
    and rotation, as well as rear fog lights. Base
    is the price you pay with the lampholders and the terminal pin
    to connect the pads with the bundle of wires. On Rassi-
    the meeting includes a built-in reflector. Left side
    is a mirror image of the right.
    Audible signals are installed on study AV-
    the purpose vehicles that can be bezrobotnego type without additional
    tion relay or horn,
    which is mounted on the vehicle in pairs (one you-
    high and the other low current) with simultaneous switch-
    eat via an additional relay (remaining auto
    the mobiles).
    Copyright MyCorp © 2024 | uCoz