Monday, 04.29.2024, 3:06 PM Welcome Guest | ||||||||||
My site |
||||||||||
Home | Sign Up | Log In | RSS | ||||||||||
|
Dispenser
The dispenser is mounted on top of the casing of the interruption a dye and consists of a rotor and cap. The rotor manufacturing the result in the form of a mushroom out of Karbolit, top it Montero- Wang contact plate. The rotor is mounted on the ledge ku lacka. Distributor cap is made from Carbo- lita. The outer part of the circumference of the completed nest Yes the number of cylinders, into which are inserted wire in- connected to the spark plugs. In the cover posted price Central socket for fastening wire high voltage tion from the ignition coil. Inside, against each nest are lateral contacts, and in the center — coal con- tact with a spring to connect the center socket with PLA- Stino rotor. The back cover fits on the housing of the interrupter the two pru- innymi snaps. A rotor rotating together with the Colac- com, alternately connects the Central contact with the Bokova- mi contacts, completing the circuit high voltage through candles those cylinders where at the moment should not compromise walk to the ignition of the working mixture. Spark plugs. Electrical discharge — spark — in- is produced in the cylinder between the electrodes of the spark plug. The candle consists of a Central electrode with an ISO- the fan motors (the core of the candle) and a steel housing containing it fastens. The case has a screwed threaded part, which Roy the candle is screwed into the threaded hole of the cylinder head the engine, in the lower part of the housing has one side electrode. In the upper part of the body of the spark plug has the spanner. The Central electrode with the insulator at- rolled in the body of the candle. For sealing between the edge- the mi corps and the padded collar of the insulator sealing strip. The Central electrode is installed on top tip for attaching high voltage wires. To ensure normal working conditions for the spark- gigane it is necessary that the temperature of the lower part of ISO- the fan motors was within 500.. .600°C at which the soot burns and purified candle. Thermal characteristics of spark plug depends on the length of the bottom of the insulator and conditions of its cooling. Excessive heating of the spark leads to pre-ignition- the national Institute of justice and the destruction of the insulator, and hypothermia — for- prizhivaniyu spark plug, oil and sludge. Choose the spark plugs for the engine in their notation- the values that specify the diameter of the threaded part, the length of the bottom part of the insulator and insulator material. The diameter of the threaded parts designated by the letters ? and where ? corresponds to the dia- meter and 18 mm And 14 mm. the Number denotes nitro number. The length of the threaded portion designated by the letters ? — 11 mm, D 19 mm. If the letters are not available, the length screwed cha- STI equal to 12 mm. the Letter "b" denotes that stands lower the average of the portion of the insulator, and T is the sealing of the insulator made termocamino. |
Copyright MyCorp © 2024 | uCoz |