CAR DIAGNOSTICS
The posts of technical diagnostics
Diagnosis — the process of establishing a technical-
state of units, assemblies, systems and mechanisms related to car
Biel with the help of devices and devices without their noticing-
CI. It gives the opportunity to detect faults, for the mouth-
wounds which require adjustment or repair
nye's work.
At the time of the diagnosis are divided into non-
discontinuous and periodic. Continuous diagnostics
is the driver in the operation of automotive
La. Periodic diagnosis is performed through the determi-
divided, pre-set mileage.
In accordance with the system of scheduled preventive
repair and maintenance diagnostics de
will into two types: General D-1 atomic and D-2. When the diag-
the investment d-1, determine the technical condition of knots and
units which ensure the safety of road
movement, and evaluate the suitability of the car for operation
orientation. Done it before-1.
When the diagnosis item D-2 not detected-
health, set the volume adjustment and maintenance
the Internet works during the MOT-2 predict resource is-
legal work until the next service.
Depending on the volume of work on THE TP and the diagnosis
aims is carried out on the production line, and
separate posts. On the production line the main posts di-
agnostics are placed in areas to-1 and to-2.
Individual posts organized in sections according to the current
repairs of aggregates and units of vehicle, such as repairs,
the engines, repair transmissions, etc.
Such an arrangement of the posts allows for diagnosis-
ical measurements before and after repair, providing the first break
evolution its quality, thus the opportunity
auto return for re-repair or
a particular node, of the unit.
Posts diagnosis is equipped by stationary stand-
mi, mobile stations, portable devices,
equipped with the necessary measuring device
properties. In some cases, are used to diagnose
sensors and devices on the dashboard of a car, for example
measures the oil pressure sensor, temperature sensor, etc.
Diagnostic stands with Jogging drums allows
allow flexibility to simulate driving conditions and loads. Stand OS-
Namen brake installation and flowmeter fuel that
ultimately allows to check basic features-
sticks of all units and units of the automobile, to compare them with pas-
tailors the data to adjust the sensors and
instruments on the dashboard of the car to identify unused-
equality.
Posts diagnosis of the individual devices are equipped with a SPE-
special instruments and devices for measuring
and control the main parameters of the unit and identify them
fault. So, post for diagnosing work
the engine is equipped with vibroacoustic equipment,
stethoscope, etc., allowing the characteristics and level
Nude noises and bangs to determine the technical condition of the Cree-
washino crank and gas distributing mechanisms.
With a stethoscope to determine the increase of clearance in
brass and main bearings of the crankshaft, between
do the piston and cylinder, valves and Cam followers etc.
establish the need to perform the adjustment
and repair work.
Mobile repair and maintenance-diagnostic
workshops are designed for maintenance-
with and repair of cars outside the workshop and Autotrans-
tailors companies. These workshops are located in
the bodywork of trucks and include equipment
tion to perform the grinding of metal processing:
plumbing, drilling, lathes, etc. This complex
equipment allows to carry out minor repairs, including
to manufacturing non-critical parts.
In addition, mobile repair shop comp
lectues devices, instruments, sensors for
measuring operating parameters of the units and components of car
and diagnostics of their technical condition.
The posts of technical diagnostics
Diagnosis — the process of establishing a technical-
state of units, assemblies, systems and mechanisms related to car
Biel with the help of devices and devices without their noticing-
CI. It gives the opportunity to detect faults, for the mouth-
wounds which require adjustment or repair
nye's work.
At the time of the diagnosis are divided into non-
discontinuous and periodic. Continuous diagnostics
is the driver in the operation of automotive
La. Periodic diagnosis is performed through the determi-
divided, pre-set mileage.
In accordance with the system of scheduled preventive
repair and maintenance diagnostics de
will into two types: General D-1 atomic and D-2. When the diag-
the investment d-1, determine the technical condition of knots and
units which ensure the safety of road
movement, and evaluate the suitability of the car for operation
orientation. Done it before-1.
When the diagnosis item D-2 not detected-
health, set the volume adjustment and maintenance
the Internet works during the MOT-2 predict resource is-
legal work until the next service.
Depending on the volume of work on THE TP and the diagnosis
aims is carried out on the production line, and
separate posts. On the production line the main posts di-
agnostics are placed in areas to-1 and to-2.
Individual posts organized in sections according to the current
repairs of aggregates and units of vehicle, such as repairs,
the engines, repair transmissions, etc.
Such an arrangement of the posts allows for diagnosis-
ical measurements before and after repair, providing the first break
evolution its quality, thus the opportunity
auto return for re-repair or
a particular node, of the unit.
Posts diagnosis is equipped by stationary stand-
mi, mobile stations, portable devices,
equipped with the necessary measuring device
properties. In some cases, are used to diagnose
sensors and devices on the dashboard of a car, for example
measures the oil pressure sensor, temperature sensor, etc.
Diagnostic stands with Jogging drums allows
allow flexibility to simulate driving conditions and loads. Stand OS-
Namen brake installation and flowmeter fuel that
ultimately allows to check basic features-
sticks of all units and units of the automobile, to compare them with pas-
tailors the data to adjust the sensors and
instruments on the dashboard of the car to identify unused-
equality.
Posts diagnosis of the individual devices are equipped with a SPE-
special instruments and devices for measuring
and control the main parameters of the unit and identify them
fault. So, post for diagnosing work
the engine is equipped with vibroacoustic equipment,
stethoscope, etc., allowing the characteristics and level
Nude noises and bangs to determine the technical condition of the Cree-
washino crank and gas distributing mechanisms.
With a stethoscope to determine the increase of clearance in
brass and main bearings of the crankshaft, between
do the piston and cylinder, valves and Cam followers etc.
establish the need to perform the adjustment
and repair work.
Mobile repair and maintenance-diagnostic
workshops are designed for maintenance-
with and repair of cars outside the workshop and Autotrans-
tailors companies. These workshops are located in
the bodywork of trucks and include equipment
tion to perform the grinding of metal processing:
plumbing, drilling, lathes, etc. This complex
equipment allows to carry out minor repairs, including
to manufacturing non-critical parts.
In addition, mobile repair shop comp
lectues devices, instruments, sensors for
measuring operating parameters of the units and components of car
and diagnostics of their technical condition.